KLOVER MiK 16 Broadcast (Bundles)

Which Accessories Do I Need for KLOVER MiK 16

Case/Bag for KLOVER MiK 16

A carrying bag will provide protection for your unit during storage or during transportation in extremely controlled conditions, such as a personal vehicle.

The lightweight, roto-molded carrying case is for carrying or storing a single, assembled KLOVER MiK 16 parabolic microphone. This case will not provide the same level of protection as our compact case or flight case but it is much lighter and more economical. (Approximate dimensions: 25″ x 25″ x 12″)

The compact case houses an un-assembled KLOVER MiK 16. There are compartments for all of the KM-16 components, and a preamp, but not headphones. This case is small enough to be accepted as carry-on luggage by most airlines. (Approximate dimensions: 24″ x 20″ x 9″)

The flight case also houses an un-assembled KLOVER MiK 16. There are compartments for all of the KM-16 components, a preamp, and collapsible headphones. This case is too large to be accepted as carry-on luggage by most airlines. (Approximate dimensions: 27″ x 24″ x 9″)

Microphone for KLOVER MiK 16

Any omnidirectional, or wide-cardioid, microphone may be used with your KLOVER MiK 16, but we offer the following microphones pre-installed as a convenience for our customers.

Microphone Madness 3.5mm TRS Lapel Mic - The MM-ML has a 3.5mm TRS connector commonly used by digital recorders and digital cameras. It requires plug-in power.

Klover Equalized XLR Lapel Mic - The Klover Equalized mic has been created specifically to provide a more natural sound when used with our 9-inch and 16-inch parabolic microphones.  It is based on the Countryman B3 so it is very weather resistant. It comes with an XLR connector and requires phantom power.

Countryman B3P4FF05B XLR Lapel Mic - The Countryman B3 is reasonably priced and very weather resistant. It comes with an XLR connector and requires phantom power.

Sennheiser MKE2-P XLR Lapel Mic - The Sennheiser MKE2 is popular with broadcast audio engineers. It comes with an XLR connector and requires phantom power.

DPA 4060 XLR Lapel Mic - The DPA 4060 is the most sensitive microphone we offer. It comes with an XLR connector and requires phantom power.

Neumann KM 183 Small Diaphragm Condenser Mic - The Neumann KM 183 is is an industry favorite small diaphragm (pencil) mic.  If features low self-noise and high SPL capabilities. It comes with an XLR connector and requires phantom power.

Sennheiser EW 112P G4 Wireless Lavaliere Microphone - The EW 112 is the only wireless microphone we offer. It comes with two output cables, one with a 3.5mm TRS connector and one with an XLR connector.  It does not require any external power.

Amplifier for KLOVER MiK 16

If not connected directly to a camera, some type of audio recorder or amplifier is required to capture audio.

The BeachTek DXA Micro Pro unit is the lowest cost but has an unbalanced output so the output can only be shared with devices that are within approximately 10 feet of the amplifier.  It can work with 3.5mm TRS or XLR microphones.

The Whirlwind MD-1 is less expensive than the Sound Devices, unit but slightly heavier.  It only works with XLR microphones.

The Sound Devices MM-1 unit is the most rugged amplifier we offer. It only works with XLR microphones.

The Zoom F1 recorder is ideal when the audio is to be monitored and/or recorded but not output to another device. It comes complete with a lapel microphone.  Do not order a second microphone.

The Zoom H4 recorder can be used to monitor and/or record audio as well as supply that audio to a PC via USB.  It can work with 3.5mm TRS or XLR microphones.

The Rolls MP-13 amplifier is ideal for connecting your microphone to a PC, or connecting a 3.5mm mic to a device a long distance away. It can work with 1/4" TRS or XLR microphones.

Headset for KLOVER MiK 16

Operators typically use their ears more than their eyes to aim the parabolic microphone. A good headset provides the audio the operators require.

The Koss Pro4AA is low cost and very rugged.

The Sennheiser HD 280 is foldable to be more compact.

The Remote Audio HN-7506 provides the ultimate in isolation for very loud environments.

Wind Cover for KLOVER MiK

Mount for KLOVER MiK 16

If you plan to occasionally use your KLOVER MiK 16 in a static situation, you may be interested in a hard mount bracket. The bracket is mounted to the dish instead of the handle assembly. A number of 1/4 inch clearance holes allow the entire unit to be mounted to a C-stand, Magic Arm, or a custom bracket you provide.

The Sound Shield bracket provides the same mounting options but also shields the back of the parabolic dish from sounds that may be coming from the rear of the dish.

The 90° brackets allow the Hard Mount Bracket or Sound Shield bracket to be easily mounted to a horizontal surface of tripod.

The pole brackets allow the Hard Mount Bracket or Sound Shield bracket to be easily mounted to vertical pole.

Spare Parts for KLOVER MiK